Viper 5706V Instruction Manual download pdf (Page 31)

Pair Remote:

Remote Pair is a process where the Responder LC and the system in

the vehicle learn each others encrypted identiﬁcation, securing their

communication from intruders. Please note that your remote controls

come pre-programmed from the factory.

Prepare the vehicle system to be Paired with a new remote

1. Open at least one of the vehicle’s doors.

2. Turn the key to the On position.

3. Within ﬁve seconds press and release one time the Control but-

ton on the Control Center.

4. Within ﬁve seconds, press and hold the Control button. The sta-

tus LED will ﬂash one time and the siren will chirp once to conﬁrm

the system is ready for remote pairing.

5. Release the Control button and proceed below.

Note: If pairing does not result within 60 seconds, the system will exit

and the siren will chirp.

Prepare the new remote to be Paired with the system

1. Make sure the remote control is set for the desired Car 1 or Car

2 operation.

2. Perform the steps under Access menu items section to access the

Pair Remote mode.

3. When the remote beeps three times and

PAIR

is displayed the

remote is ready to pair.

4. Press the

button.

5. Wait several seconds for feedback as the remote generates a

security encryption and sends it to the Control Center. If Pair is

successful the siren sounds and the remote emits several tones.

The screen displays if the Pairing is successful or failed with cor-

responding text. If pairing failed, repeat step 4.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 62 63

No comments

Viper 5706V Instruction Manual Page 31