Viper 5601 Installation Guide

ModelsViper 5601 Clifford 2.2Python 1601Security and Remote StartInstallation Guide This product is intended for installation by a professional inst

10© 2009 Directed Electronics. All rights reserved.Remote PairingPrepare the vehicle system to be Paired with a new remoteOpen1. a door. Turn2. th

11© 2009 Directed Electronics. All rights reserved.Programming System FeaturesThe System Features Learn Routine dictates how the unit operates. It is

12© 2009 Directed Electronics. All rights reserved.Feature MenusDefault settings are Opt. 1 (in bolder type). New features are bold with grey backgrou

13© 2009 Directed Electronics. All rights reserved.4. Siren Duration30sec: the siren output for full trigger activations and Panic mode is 30 seconds

14© 2009 Directed Electronics. All rights reserved.Menu 2 - ConvenienceMenu Item Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+1 One-time BypassOne time b

15© 2009 Directed Electronics. All rights reserved.On: the OEM Alarm Disarm wire will pulse as programmed when the Aux/Trunk output is activated1. Off

Menu 3 - Remote startMenu Item Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+1 Transmission ModeManualAutomatic2 Engine Checking ModeVirtual TachVoltage O

17© 2009 Directed Electronics. All rights reserved.6. Turbo ModeNo turbo Mode: Turbo mode is not available1. On – 1/3/5/10 minutes: Turbo Mode is ava

18© 2009 Directed Electronics. All rights reserved.locked) during remote start and after shut downOn: the Door lock and Factory Alarm Re-arm outputs w

19© 2009 Directed Electronics. All rights reserved.Zone 4 Sensor Type: sets the Zone 4 (Sensor 2) name to be displayed in the Text Field for Warn-away

Bitwriters with a date code of 6a or older require an IC upgrade (p/n 998M). Some bitwriters with a date code of 6B do not require the IC upgrade, ref

20© 2009 Directed Electronics. All rights reserved.Basic Remote FunctionsSee Owner’s guide for functionality details on the remote control.Reset and D

21© 2009 Directed Electronics. All rights reserved.Table of ZonesA zone is represented by the number of status LED flashes used by the system to identi

22© 2009 Directed Electronics. All rights reserved.Troubleshooting: Remote StartThe remote start will not activate the remote start Check remote start

23© 2009 Directed Electronics. All rights reserved.Is the remote start programmed for voltage sense? If this does not work, a tach wire

ContentsWarning! safety first ...

4© 2009 Directed Electronics. All rights reserved.Warning! safety firstThe following safety warnings must be observed at all times:Due to the complexit

5© 2009 Directed Electronics. All rights reserved.Wiring DiagramValet switchLED Control buttonStatus LED Control CenterControl CenterControl CenterVal

6© 2009 Directed Electronics. All rights reserved.Wiring ConnectionsMain Harness (H1), 12-pin connectorH1/1RED/WHITE (-) 200mA AUX/TRUNK OUTPUTH1/2 RE

7© 2009 Directed Electronics. All rights reserved.H3/6RED IGNITION 1 +12V INPUT (30A FUSED)H3/7PINK/WHITE (30) FLEX RELAY OUTPUT (car side of ign, acc

8© 2009 Directed Electronics. All rights reserved.Important: After successfully learning Virtual Tach, a small minority of vehicle starters may over c

9© 2009 Directed Electronics. All rights reserved.Remote Start Shutdown/Startup DiagnosticsShutdown diagnostics: If the remote start activates but fai