Viper 310V User Manual download pdf (Page 12)

2005 Directed Electronics, Inc. (Canada)

Press to disarm the security system when it is already

armed. If the power locks are controlled by the system, the doors

will also unlock. Disarming is confirmed when the parking lights

flash twice and the siren emits two chirps. The LED system status

indicator will also stop flashing. The siren chirping either four or

five times when disarming indicates Tamper Alert, which is

described in the Diagnostics section of this guide.

If your remote is lost or damaged, you can manually disarm your

vehicle security system. To disarm the system without a remote,

you must have the vehicle's ignition key and know where the

Valet® switch is located. Be sure to check with your installer at the

time of installation for the location of the Valet® switch.

To disarm the security system,

turn the ignition key on and

press the Valet® switch within

15 seconds. The system should

now disarm. If the system does not disarm, you may have waited

too long to press the Valet® switch; turn the ignition off and

repeat the process.

Location of Valet®

Switch________________________________

DRW-35

Disarming Without a Remote

Disarming

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

No comments

Viper 310V User Manual Page 12