Viper 3105V Installation Guide download pdf (Page 32)

Table of Zones

Zone No. Trigger type Input description

1 Instant H1/6 BLUE - Connect to optional hood/trunk

pins.

2 On-board shock sensor Heavy impact detected by the on-board shock

sensor.

3 Two-stage, progresses from Door switch circuit. H1/5 GREEN or H1/7

VIOLET warning to full alarm

4 Multiplexed Input BLUE and GREEN wires of optional sensor

plug. Inputs shorter than 0.8 seconds will trigger

a Warn Away response, while inputs longer than

0.8 seconds will instantly trigger a full alarm

sequence and report Zone 4.

5 Two-stage (similar to doors) Ignition input. H1/9 YELLOW.

NOTE: The Warn Away® response does not report on the LED.

Long Term Event History

The system stores the last two full triggers in memory. These are not erasable.

Each time the unit sees a full trigger, the older of the two triggers in memory

will be replaced by the new trigger. To access long term event history:

1. With the ignition off, press and HOLD the Valet/Program

switch.

2. Turn on the ignition.

3. Release the Valet/Program switch.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

No comments

Viper 3105V Installation Guide Page 32