21
© 2009 Directed Electronics. All rights reserved.
Figure A
Figure B
Important!
Always use the Vehicle Safety Check section of this guide to
verify that the vehicle cannot be started in ANY drive gear and that the
override switch is functioning properly.
H2/2
VIOLET/WHITE TACHOMETER INPUT WIRE
This input provides information to the unit about the engine’s revolutions
per minute (RPMs). In vehicles with conventional coils this wire can be
connected to the negative side of the coil - or to the non-common wire
at the fuel injector. Once connected, you must teach the system the tach
signal. (See
Tach Learning
section of this guide.)
Comments to this Manuals