Viper 4103XV Installation Guide download pdf (Page 30)

Channel Function

Auto Learn Standard Configuration (default)

The auto learn configuration automatically sets up the remote's button

configuration.

Delete remotes: This feature erases all remotes from the memory of the

system. This is useful in cases when a customer’s remote is lost or stolen.

Note: This does not reset the programmed features of the system or reset

the Virtual Tach setting.

Reset Features: This resets all of the system features to the factory default

settings.

Note: This feature does not delete the remotes from the system or reset the

Virtual Tach setting.

Virtual Tach Reset: Deletes all previously learned values for Virtual Tach,

and on the next remote start sequence the unit begins virtual tach initial-

ization.

Note: The “Zap” feature on the Bitwriter does not reset the Virtual tach

setting.

Transmit.

While

HOLDING

the Program

switch, press the



button to program the remote

or to reset one of the features in the remote pro-

gramming grid. The horn honks to conﬁrm that the

code has been successfully programmed. It is not

possible to teach a remote control to the system

more than once.

Release.

Once the code is learned, the Program

switch can be released.

You can advance from programming one channel to another by re-

leasing the Program switch and tapping it to advance steps and then

holding it.

For example, suppose you have programmed Channel One

and you want to program Channel Two. Release the Program

switch, then Press it one time and release it to advance from

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

No comments

Viper 4103XV Installation Guide Page 30