Viper 3105V Instruction Manual download pdf (Page 34)

Glossary of Terms

Document Terminology

ASK

Amplitude Shift Keying—a method of transmitting data.

1-way Remote

Control

A hand-held remote control, also called transmitter that oper-

ates the various functions of your system but does not provide

message display..

Control Button

(Valet Switch)

A small push button located on your system’s control center. It

is used to override (disarm) the system when a remote is not

available or to enter/exit valet mode

Control Module (unit)

The “brain” of your system. Usually hidden under the dash

area of the vehicle. It houses the microprocessor which moni-

tors your vehicle and controls all of the system’s functions.

FailSafe Starter Kill

A switch controlled by the security system which once acti-

vated prevents the vehicle’s starter from cranking, when the

system is armed. The vehicle is never prevented from cranking

when the system is disarmed, in Valet mode - or if the starter

interrupt switch fails. Installation may require additional labor.

Input

A physical connection to the system. Input may be provided

by a sensor, a pinswitch or through an existing system in the

vehicle, such as ignition or courtesy lights.

Siren

Noise generating device usually installed in the engine com-

part ment of the vehicle. It generates the “chirps” and the six

tones you hear when the alarm is triggered.

Status LED

A light used to indicate the status of your system, located on

your system’s Control Center.

Trigger or Triggered

Sequence

When the alarm “goes off” or “trips”, the system triggers a

sequence of siren sounding and parking lights ﬂashing for a

programmed duration.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41

No comments

Viper 3105V Instruction Manual Page 34