Viper Responder 350 Installation Guide download pdf (Page 35)

Troubleshooting

Starter kill doesn’t work.

Is the correct starter wire being interrupted? If the car starts when the •

starter kill relay is completely disconnected, the wrong starter wire has been

cut and interrupted.

YELLOW wire is not connected to true ignition. It is connected to an •

accessory circuit.

Shock sensor doesn’t trigger the alarm.

Has the NPC•

system been triggered? If so, you will hear five chirps when

disarming. To check this, turn the ignition key on and off to clear the NPC

from memory, and then retest the shock sensor. For a detailed description of

NPC

, see Owner’s Guide.

Door input does not immediately trigger full alarm. Instead, I hear

chirps for the first three seconds.

That’s how the progressive two-stage door input works! This is the instant •

response feature of this system. Even if the door is closed immediately, the

system provides an instant trigger by chirping, and the progressing to a

constant siren.

Closing the door triggers the system, but opening the door does not.

Have you correctly identified the type of door switch system? This happens •

often when the wrong door input has been used.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

No comments

Viper Responder 350 Installation Guide Page 35